9
DOCKING cameras
LENS mount
The intermediate image is found at infinity, to enable easy focusing of the
docking cameras without additional lens kits.
Simply attach the docking camera on the camera sled by tighten the 1/4”
thread screw. Adjust the docking camera to the ocular by using the side to
side screw and the up to down quick release with fine adjustment. Several
types of docking rings with different filter threads ensure a secure connection
between Docking Camera Lens and the ocular (docking rings can be
purchased from KINOMATIK).
MOVIEtube Approved Docking Cameras:
Sony: HDR-FX1/ HVR-Z1, PD100, PDX10, PD150/ 170,
VX1000/ 2000/ 2100, TRV890/ 900/ 950,
Canon: XM2, MVX3i*
Panasonic: MX3000*, DVX100, NVGS400* HVX200
JVC: HD10U, DV300U*, PD1*
Other cameras approximately the size of the cameras mentioned above
should work.
Cinematography lenses from Arri PL, Panavision PV & Mitchell BNC-R, as
well as photo lenses from Nikon, Canon FD, Minolta MD,
Pentax K, Pentax M42 Screw, Zeiss-Contax, Leica-R and Yassica/ Olympus
OM can be used with the appropriate lens mount. To change the lens mount,
release it by turning the MTbayonett ring counter clockwise. The ring is
found on the very front of the image tube near the film plane.
Attention!
- To carry the camera system please use only the handle grip of the
MOVIEtube ST. Never use the handle bar of the docking camera.
- Never open the red sealed screws or remove the protective glass
inside the image tube. That voids your guaranty!!!
- We found some differences in mounting Panasonic and Sony
camera models. For some models you need a longer screws for
example use ¼ “ Manfrotto screws. Attention: If you use a longer
screw in a shorter camera mount, you may brake through the mount
and damage the electronic of the camera. Shorten the screw while
using a washer between the screw head and the bottom of the
camera mounting table
- Don’t remove both bars at once while MOVIEtube is attached to the
tripod plate. The MOVIEtube may fall down. Understand that the
bars are connecting the main-unit with the shoulder/support-unit.
- Never use lenses with a rear element length (measured from
bayonet flange to the far end) of more than 32mm. Using lenses
longer than 32mm breaks the protective glass.
- Do not short the battery or the electronic module’s in- and outputs.
(6 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern